22 Ohm 0402 Resistors for the original PandaBoard. These resistors must be soldered onto the back side of the PandaBoard.
The PandaBoard has 29 resistors on the back side of the board that need to be populated and soldered. These resistors enable the LCD video signals to be sent out the LCD expansion port.
Each cut strip contains approximately 50 resistors. We included extra resistors so that you would have plenty of spares to work with.
These resistors are only needed on the original PandaBoard. They are NOT needed on the BeagleBoard Rev-C, BeagleBoard-xM, and PandaBoard-ES.
