|
| All Products |
|
See details
|
Hammer
SKU: 100
The Hammer CPU module is based upon Samsung’s S3C2410A ARM920T processor. It gives you the power of an ARM9 processor in an easy to use modular package. The Hammer CPU module fits into a standard 40 pin DIP socket. It is an ideal platform for code development and prototyping in an embedded e...
Our price: $159.00 |
|
See details
|
Hammer Kit
SKU: 200
The Hammer Kit includes everything you need to start developing with Linux:
Hammer CPU board, Hammer Carrier board, Flyswatter, JTAG ribbon cable, 5V Power supply, USB cable, RS232 serial cable, and CD.
Our price: $199.00 |
|
See details
|
Hammer Carrier
SKU: 300
The Hammer Carrier board is a prototype board designed for use with the 40-pin ARM9 Hammer CPU board. The board contains a power supply circuit, RS232 serial port, USB host port, USB slave port, a SD/MMC memory card connector, beeper circuit, ...
Our price: $39.00 |
|
See details
|
Trainer Board
SKU: 380
The Trainer Board is a prototyping expansion board for the original BeagleBoard (Rev B or C) . It provides voltage level translators for I2C, SPI, GPIO's and an Atmega328 processor that is Arduino hardware compatible.
Our price: $59.00 |
|
See details
|
Trainer-xM Board
SKU: 381
The Trainer-xM Board is a prototyping expansion board for the BeagleBoard-xM. It provides voltage level translators for I2C, SPI, GPIO's and an Atmega328 processor that is Arduino hardware com...
Our price: $59.00 |
|
See details
|
BeagleBuddy Zippy Ethernet Combo Board
SKU: 390
The Zippy is an expansion board for the BeagleBoard that adds a 10BaseT Ethernet interface, a second SD/MMC memory card interface, a battery backed-up Real Time Clock, a second RS-232 serial port, and a five volt I²C expansion interface.
Our price: $79.00 |
|
See details
|
Flyswatter
SKU: 400
The Flyswatter is a compact USB to JTAG in-circuit debugger and programmer designed for ARM cores. It can be used with all ARM processors that are supported by OpenOCD. It connects via USB to the host PC.
Our price: $49.95 |
|
See details
|
BeagleBoard Adapter Kit
SKU: 410
This kit provides adapter boards that make the Flyswatter compatible with the BeagleBoard's JTAG and RS-232 headers.
Our price: $19.00 |
|
See details
|
ARM 20-Pin JTAG Adapter Kit
SKU: 415
This kit provides an adapter board that converts the Flyswatter's 14-pin JTAG interface into a standard ARM 20-pin JTAG interface.
Our price: $19.00 |
|
|
|
|
