|
|
|
||
| Debugger Lure | Silverjaw Lure | Flyswatter2 | ||
|
SKU: 1100
|
SKU: 1000
|
SKU: 600
|
||
|
NEW - The Debugger Lure is an expansion board for the MinnowBoard Max/Turbot that adds a JTAG debugging interface for the Intel XDP. |
The Silverjaw Lure is an expansion board for the MinnowBoard Max that adds dual interfaces: mSATA & mPCIE. |
The Flyswatter2 is a high speed JTAG in-circuit debugger and programmer designed for ARM and MIPS target boards. It works with the open source software: OpenOCD (Open On-Chip Debugger). |
||
|
Price: $49.00
|
Price: $49.95
|
Price: $89.00
|
||
|
|
|
|
||
|
|
|
||
| SPI Hook | mPCIe Half-Size Extender Bracket | BeagleBone Black JTAG Adapter Kit | ||
|
SKU: 1010
|
SKU: 1091
|
SKU: 670
|
||
|
The SPI Hook is a dual function utility board: 1) A SPI Flashing tool that can read, write, and erase the SPI Flash located on the MinnowBoard Max/Turbot and 2) adds a virtual RS232 serial port for communicating with the MinnowBoard Max/Turbot. |
NEW - This bracket extends a half-sized mPCIe card to a full-sized card. |
The BeagleBoard Black JTAG Adapter Kit provides all the hardware you need to add a JTAG interface to the BeagleBone Black board. |
||
|
Price: $29.00
|
Price: $3.00
|
Price: $39.00
|
||
|
|
|
|
||
|
|
|
||
| ARM20cTI20 - cTI 20-pin JTAG Adapter Board | Flyswatter | ARM20TI14 - TI 14-pin JTAG Adapter board | ||
|
SKU: 660
|
SKU: 400
|
SKU: 620
|
||
|
The ARM20cTI20 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into a compact TI (cTI) 20-pin JTAG interface for TI's BeagleBone Black board. |
The Flyswatter is a compact USB to JTAG in-circuit debugger and programmer designed for ARM cores. It can be used with all ARM processors that are supported by OpenOCD. It connects via USB to the host PC. |
The ARM20TI14 JTAG adapter board converts the Flyswatter2 to a Texas Instruments 14-pin JTAG interface. This board works with the BeagleBoard, BeagleBoard-xM, or PandaBoard. |
||
|
Price: $30.00
|
Price: $49.95
|
Price: $23.00
|
||
|
|
|
|
||
|
|
|
||
| ARM20ARM14 - ARM 14-pin JTAG Adapter board | ARM20MIPS14 - MIPS 14-pin JTAG Adapter board | ARM20OnCE14 - OnCE 14-pin JTAG Adapter board | ||
|
SKU: 630
|
SKU: 640
|
SKU: 650
|
||
|
The ARM20ARMI14 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into an ARM 14-pin JTAG interface. |
The ARM20MIPS14 JTAG adapter board converts the Flyswatter2's ARM 20-pin JTAG interface into an MIPS 14-pin JTAG interface |
The ARM20OnCE14 JTAG adapter board converts the Flyswatter2 to a OnCE 14-pin JTAG interface. This board works with Tensilica target boards. |
||
|
Price: $23.00
|
Price: $23.00
|
Price: $23.00
|
||
|
|
|
|
||
|
|
|
||
| Trainer-xM Board | Trainer Board | Beacon Board | ||
|
SKU: 381
|
SKU: 380
|
SKU: 501
|
||
|
The Trainer-xM Board is a prototyping expansion board for the BeagleBoard-xM. It provides voltage level translators for I2C, SPI, GPIO's and an Atmega328 processor that is Arduino hardware |
The Trainer Board is a prototyping expansion board for the original BeagleBoard (Rev B or C) . It provides voltage level translators for I2C, SPI, GPIO's and an Atmega328 processor that is Arduino hardware compatible. |
NEW - The Beacon Board is a small LED display accessory board designed for the Beagle Board or PandaBoard. |
||
|
Price: $59.00
|
Price: $59.00
|
Price: $20.00
|
||
|
|
|
|
||
|
|
|
||
| Hammer | Hammer Kit | Hammer Carrier | ||
|
SKU: 100
|
SKU: 200
|
SKU: 300
|
||
|
The Hammer CPU module is based upon Samsung’s S3C2410A ARM920T processor. It gives you the power of an ARM9 processor in an easy to use modular package. The Hammer CPU module fits into a standard 40 pin DIP socket. It is an ideal platform for code development and prototyping in an embedded environment. You can quickly interface to the Hammer using your standard prototyping tools that are based upon 0.1 inch centers. |
The Hammer Kit includes everything you need to start developing with Linux: Hammer CPU board, Hammer Carrier board, Flyswatter, JTAG ribbon cable, 5V Power supply, USB cable, RS232 serial cable, and CD. |
The Hammer Carrier board is a prototype board designed for use with the 40-pin ARM9 Hammer CPU board. The board contains a power supply circuit, RS232 serial port, USB host port, USB slave port, a SD/MMC memory card connector, beeper circuit, and a large user prototyping area on 0.100 inch grids. |
||
|
Price: $99.00
save 38%
|
Price: $89.00
|
Price: $39.00
|
||
|
|
|
|
||
|
||||
| DVI Debug Tool | ||||
|
SKU: 750
|
||||
|
The DVI Debug Tool provides an easy way to debug HDMI/DVI video signals. |
||||
|
Price: $79.00
|
||||
|
|
Welcome to Tin Can ToolsTin Can Tools specializes in designing JTAG debuggers and embedded ARM boards for engineers, programmers, and enthusiasts. Our Flyswatter2 is a high speed JTAG OpenOCD debugger/programmer for ARM and MIPS target boards. The Flyswatter2 provides a standard 20-pin ARM JTAG interface and a RS232 serial port that can be used to communicate with the target system. It comes in a small package that you can carry in your pocket. Featured products |
All Products