Home :: JTAG Debuggers :: BeagleBone Black JTAG Adapter Kit

BeagleBone Black JTAG Adapter Kit

BeagleBone Black JTAG Adapter Kit
Price: $39.00
SKU 670
Qty in Stock 39
Weight 0.60 lbs
Qty in Stock 39
Quantity 39 available

The BeagleBone Black comes from the factory without its JTAG connector installed.  This kit provides all of the hardware you need (except solder and soldering iron) to add a cTI 20-pin JTAG connector to the BeagleBone Black.  The kits also includes the ARM20cTI20 JTAG Adapter Board that converts the BeagleBone Black's cTI 20-pin JTAG interface into a standard ARM 20-pin JTAG interface.  You can them connect the Flyswatter2 directly to the BeagleBone Black's JTAG interface.

Included in the package:

  • cTI 20-pin male header (unshrouded)
  • ARM20cTI20 JTAG Adapter Board
  • 20-pin (2 x 10) JTAG ribbon cable (length = 8 inches)
  • Four 1 inch hex board standoffs
  • Four #4-40 x 3/8" machine screws - Phillips pan head


  • Open hardware – complete schematics provided
  • RoHS compliant


  1. The ARM20cTI20JTAG Adapter board is designed to work with the Flyswatter2 (it does not work with the original Flyswatter).
  2. This kit requires you to hand solder the cTI 20-pin male header onto the back of the BeagleBone Black board.  The solder and soldering iron are not included in this kit.



: *
: *
: *
Type the characters you see in the picture:

The code is case-sensitive and must be entered exactly as above.
website security