Home :: JTAG Debuggers :: BeagleBoard Adapter Kit

BeagleBoard Adapter Kit

Price: $19.00
SKU 410
Qty in Stock 32
Weight 0.50 lbs
Qty in Stock 32
 
Quantity 32 available

This kit provides adapter boards that enable the Flyswatter to interface with the BeagleBoard's JTAG and RS-232 headers.  This adapter works with the following boards:

  • BeagleBoard (original B/C versions)
  • BeagleBoard-xM
  • PandaBoard


Features:

  • JTAG Adapter Board - This board plugs into the Flyswatter's 14-pin ARM JTAG connector and converts the pins to a 14-pin header that is compatible with the BeagleBoard's 14-pin JTAG interface (TI Interface). The Adapter board uses the 14-pin JTAG cable that comes with the Flyswatter.
  • RS-232 Adapter Board -  This board plugs into the Flyswatter's RS-232 connector and converts the serial port pins into a 10-pin header that is compatible with the BeagleBoard's 10-pin RS-232 interface.
  • 10-pin Ribbon Cable -  This cable is used to connect to the BeagleBoard's 10-pin RS-232 interface to the Flyswatter.  Cable length = 8 inches.
  • Open hardware – complete schematics provided
  • Package Includes: JTAG adapter board, RS-232 adapter board, 10-pin RS-232 ribbon cable
This kit provides JTAG adapter boards that enable the Flyswatter to interface with the BeagleBoard's JTAG and RS-232 headers.  This adapter works with the following boards:
  • BeagleBoard (original B/C versions)
  • BeagleBoard-xM
  • PandaBoard

Features:
  • JTAG Adapter Board - This board plugs into the Flyswatter's 14-pin ARM JTAG connector and converts the pins to a 14-pin header that is compatible with the BeagleBoard's 14-pin JTAG interface (TI Interface). The Adapter board uses the 14-pin JTAG cable that comes with the Flyswatter.
  • RS-232 Adapter Board -  This board plugs into the Flyswatter's RS-232 connector and converts the serial port pins into a 10-pin header that is compatible with the BeagleBoard's 10-pin RS-232 interface.
  • 10-pin Ribbon Cable -  This cable is used to connect to the BeagleBoard's 10-pin RS-232 interface to the Flyswatter.  Cable length = 8 inches.
  • Open hardware – complete schematics provided
  • Package Includes: JTAG adapter board, RS-232 adapter board, 10-pin RS-232 ribbon cable
Documents:
Note:  This BeagleBoard JTAG Adapter kit only works with the original Flyswatter.  If you want a Flyswatter2 JTAG Adapter kit for the BeagleBoard, BeagleBoard-xM, or PandaBoard, you need the ARM20TI14 JTAG Adapter board.

 

: *
: *
: *
 
website security