Description
The ARM20TI14 JTAG adapter board converts the Flyswatter2’s ARM 20-pin JTAG interface into a 14-pin JTAG interface for Texas Instruments target boards.
This JTAG adapter board enables the Flyswatter2 to interface with the following target boards:
- BeagleBoard (Rev B/C versions)
- BeagleBoard-xM
- PandaBoard
- Any target board with a TI 14-pin JTAG interface
Included in the package:
- ARM20TI14 JTAG Adapter Board
- 14-pin (2 x 7) JTAG ribbon cable (length = 8 inches)
Features:
- JTAG Adapter Board – This board plugs into the Flyswatter2’s JTAG connector and converts it to a 14-pin header that is compatible with the BeagleBoard’s 14-pin JTAG interface (TI Interface).
- Board Dimensions – 1.2 inches x 1.2 inches
- Open hardware – complete schematics provided
- Package Includes: – ARM20TI14 JTAG adapter board, 14-pin JTAG ribbon cable (length = 8 inches)
- RoHS compliant
Notes:
- The ARM20TI14 JTAG Adapter board is designed to work with the Flyswatter2.
- The ARM20TI14 JTAG Adapter board also works with Lauterbach JTAG debuggers.
Documents: